![]() Set the pocket hole jig for 1-1/2” material and drill pocket holes in each end. Secure the panels inside the framing, with the back faces flush, using glue and 1-1/4” pocket hole screws.Ĭut the 2×2 pieces for the front and back stretchers. Set the pocket hole jig for ¾” material and drill pocket holes in all four edges of the side panels. Assemble the frames using glue and 2-1/2” pocket hole screws. With the pocket hole jig set for 1-1/2” material, drill pocket holes in each end of the shorter 2×2 framing pieces. 4 – ¼” plywood at 4-1/2” x 11-1/2” – Drawer Front Panel Notes about the project:Įdge banding will be applied to the exposed edges of the top and shelves prior to securing it to the framing.Ī close-quarter drill attachment may be needed to drive the pocket hole screws in tight spaces.Ĭut the pieces for the side framing and the side panels.8 – 1×3 (ripped to 2” wide) at 11” – Drawer Front Rails.8 – 1×3 (ripped to 2” wide) at 8” – Drawer Front Stiles.1 – ¾” plywood at 13” x 15” – Drawer Shelf.4 – 2×2 at 15” – Front & Back Stretchers.Pneumatic brad nailer with compressor (or battery powered nailer).Router with 1/4” rabbeting bit and 1/4” dado bit.1 – 4’ x 8’ sheet of ¾” plywood Tools Needed:.Four sets of 12” drawer slides (Edge banding, optional (for the top) (It is an easy build that can be completed in a couple of weekends and can be finished however you choose! I’ve also included a cutting diagram for the plywood to maximize the sheet with minimal scrap! It sits just over 6′ tall, and is the perfect place to store towels and other bath toiletries. The linen cabinet woodworking plans feature a narrow profile with four drawers and two shelves. ![]() They graciously allowed me to share the DIY Furniture Plans to Build a Bathroom Linen Tower on DbSC as well as a photo of their fabulous bath vanity! ![]() Once the vanity was completed, they also wanted a custom DIY linen cabinet to match. Several months ago, I was contacted by readers who asked me to draw a custom bath vanity for their space. An Easy to Build Linen Tower to Match a Custom Vanity ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |